Having found us on the internet and seen what we were capable of doing, we were asked to quote for renovating their main and en-suite bathrooms (pictures for main bathroom will be posted once complete).

For the en-suite bathroom we were given a brief which including increasing the size of the room and provision of a power shower.  The problem with this room was that despite it's large size, the airing cupboard, hot water cylinder and controls were in one corner occupying a huge and unnecessary amount of space.

Following survey of the loft, we proposed moving the hot water cylinder up there, reducing the cupboard size to the minimum to house the controls for the central heating (the cupboard was slightly recessed into the wall - we have not reduced the room size at all despite appearances).

Once the cylinder was out of the way, we proposed a large shower enclosure with riser kit and body jets served by a pump which would feed the whole house therefore allowing the main bathroom to benefit also.  With feedback from our customer, we lastly specified vanity units from Utopia including a sit-on basin wash station and concealed cistern WC. 

A stunning result combined with the natural stone appearance of the wall tiles, this room now oozes luxury whilst benefitting from the newly created space

AWI designed, specified, supplied and installed this bathroom.

From start to finish the job included:

• Construction of a new tank stand in the loft space to raise the height of the existing cold water store to the maximum permissable; extension of the tank stand to allow for a second 50 gallon tank to be added
• Construction of a new tank stand to carry the hot water cylinder
• Removal of the hot water cylinder into the loft space including the associated re-plumbing and re-wiring
• Installation of a Salamander whole house 3 bar pump
• Demolition of the airing cupboard
• Construction of a new door way across the recess left by the cupboard removal, hanging of a new door
• Removal of the existing bathroom suite, wall and floor coverings
• Preparation of the walls including re-dry-lining
• Installation of PVC ceiling cladding
• Installation of a 6 * IPx4 mains voltage halogen down-lighters
• Installation of a chrome effect extractor fan with remote motor located in the loft, ducted outside
• Re-wiring including installation of a new RCD protected circuit to provide power to the under-floor heating and shower pump
• Installation of vanity units as depicted including re-plumbing as required
• Walls fully tiled (porcelain tiles laid brick bond)
• Floor fully tiled (porcelain tiles laid in 3 size random pattern) including installation of Warmup under-floor heating system
• Installation of the new bathroom suite including Merlyn Series 5+ 1200 * 900mm chrome offset quadrant shower enclosure,  Merlyn Sensa Shower system incorporating 4 body jets and riser kit, sit on basin wash station, concealed cistern WC and heated towel rail